Shows

Show Dates Location Booth - Exhibitor
From 26/3/2019
to 28/3/2019
Toulouse France Missler Software Sud-Ouest
From 27/3/2019
to 29/3/2019
Brussels Belgium B32 - 3D Ultra Surfaces
From 28/3/2019
to 30/3/2019
Parma Italy Stand L75 - Pad. 2 - Missler Software Italia S.R.L.
From 2/4/2019
to 3/4/2019
PARIS France Missler Software
From 9/4/2019
to 12/4/2019
CELJE Slovenia HALL L1 stand 46 - CSI d.o.o.
From 17/4/2019
to 24/4/2019
TOKYO Japan KODAMA Corporation, Ltd.
From 17/4/2019
to 19/4/2019
NAGOYA Japan KODAMA Corporation, Ltd.
From 26/4/2019
to 28/4/2019
Sosnowiec, Poland Poland TopSolution
From 8/5/2019
to 11/5/2019
Lisbon Portugal CADSOLID
From 14/5/2019
to 17/5/2019
Bassel Switzerland Missler Software Switzerland
From 14/5/2019
to 17/5/2019
Basel/Switzerland Switzerland K34 - CADAM Solutions AG
From 15/5/2019
to 15/5/2019
Hi-Tec, Monterrey, N.L. Mexico CIM Co.
From 21/5/2019
to 24/5/2019
NITRA Slovakia CENTERSOFT s.r.o.
From 27/5/2019
to 31/5/2019
Hannover Germany AdeQuate Solutions GmbH
From 27/5/2019
to 31/5/2019
Hannover Germany Moldtech GmbH / Baden-Württemberg
From 17/6/2019
to 23/6/2019
Le Bourget France Missler Software Centre & Nord
From 19/6/2019
to 22/6/2019
NAGOYA Japan KODAMA Corporation, Ltd.
From 25/6/2019
to 28/6/2019
CASABLANCA Morocco I&H Polymer Eng.
From 5/9/2019
to 5/9/2019
Hi-Tec, Tijuana, B.C. Mexico CIM Co.
From 10/9/2019
to 13/9/2019
Poznań, Poland Poland TopSolution
From 16/9/2019
to 21/9/2019
Hannover Germany AdeQuate Solutions GmbH
From 16/9/2019
to 21/9/2019
Hannover Germany Moldtech GmbH / Baden-Württemberg
From 16/9/2019
to 21/9/2019
HANNOVER Germany WeSt GmbH
From 17/9/2019
to 19/9/2019
Hardenberg Netherlands Bemet International B.V.
From 2/10/2019
to 4/10/2019
OSAKA Japan KODAMA Corporation, Ltd.
From 7/10/2019
to 11/10/2019
BRNO Czech Republic CENTERSOFT s.r.o.
From 9/10/2019
to 11/10/2019
León, Gto. Mexico 214 - CIM Co.
From 15/10/2019
to 19/10/2019
Pordenone Italy Missler Software Italia S.R.L.
From 17/10/2019
to 19/10/2019
PORTO - Exponor Portugal CADSOLID
From 17/10/2019
to 19/10/2019
NAGANO Japan KODAMA Corporation, Ltd.
From 22/10/2019
to 24/10/2019
Toulouse France Missler Software Sud-Ouest
From 23/10/2019
to 26/10/2019
NAGOYA Japan KODAMA Corporation, Ltd.
From 24/10/2019
to 26/10/2019
Lisbon - FIL Portugal CADSOLID
From 24/10/2019
to 24/10/2019
Hi-Tec, Tlalnepantla, Edo. Méx Mexico CIM Co.
From 29/10/2019
to 1/11/2019
BRNO Czech Republic CENTERSOFT s.r.o.
From 4/11/2019
to 8/11/2019
PARIS France Missler Software Centre & Nord
From 6/11/2019
to 9/11/2019
Batalha - Exposalão Portugal CADSOLID
From 7/11/2019
to 7/11/2019
Hi-Tec, Guadalajara, Jal. Mexico CIM Co.
From 20/11/2019
to 21/11/2019
Rennes France Missler Software Ouest
From 21/11/2019
to 24/11/2019
PORTO - Exponor Portugal CADSOLID
From 27/11/2019
to 28/11/2019
MADRID Spain Tecnocim, S.L